Live Preview

Connection/Disconnection

The list style is treeshape:

connection:

①Double-click on the selected device/channel to enter the connected video state.

②After selecting the device/channel, right click and select “Connect Video” to enter the connected video state (Figure 1)

disconnect:

③Double-click to disconnect the current connection after selecting the connected device/channel

④After selecting the device/channel, right click and select ‘Disconnect’ to disconnect the current connection.

Figure 1
Figure 1

 

List style is graphic:

①After selecting the device/channel, click the play button on the device list to enter the connected video status.

②After selecting the device/channel, click the stop button on the device list to disconnect the current connection status.

③Right-click operation connection/disconnection is consistent with the tree list style. The specific operation can be referenced.

Note:poor performance of the computer will directly affect the smoothness of the preview video. It is recommended that the number of channels connected to the device be gradually increased

 

 

Video/screenshot

Video:

①Click the Record button on the toolbar to enter the video recording status (as shown in Figure 1 below)

②After the video operation, click the record button again to stop recording.

 

Note:

①The actual recording duration is not equal to the time difference between the start recording time and the end recording time.

②If the device network is interrupted, the recording will succeed but no video file will be saved.

③The channel is maximized or minimized during recording, and the recording will stop.

 

Screenshot:

Click the screenshot button on the toolbar to enter the screenshot status (as shown in Figure 1 below)

Note:

①If the switching stream video is not loaded, the screenshot operation will be saved.

②The screenshot does not have the function of continuous screenshots. Clicking the screenshot button once will capture an image.

Figure 1
Figure 1
 

 

Panorama mode

enter:

①Double-click the channel screen to enter the maximized state, right click and select “panoramic mode” to switch to the panorama mode, enter the panorama, and the code stream is automatically switched to HD.

②The channel screen is in 1 split screen mode, and the panorama mode option is available on the right toolbar. Click to select to switch the panorama mode.

drop out:

①Click on Panorama mode on the right toolbar and select ‘Exit panorama’ to exit panorama mode

②Exit the panorama mode by exiting the screen from the split screen state.

Panorama mode
Panorama mode
Cylindrical mode
Cylindrical mode
Expand mode
Expand mode
Split screen mode
Split screen mode
Quad screen mode
Quad screen mode
Six-screen mode
Six-screen mode

 

Note:

①In the local login mode, you can select 6 display modes in the panorama mode, including: panorama, cylinder, expand, 2 split screen, 4 split screen, 6 split screen

②In the cloud login mode, you can select 4 display modes in the panorama mode, including: panorama, cylinder, split screen, quad screen

 

  • Installation mode:

        Suspension: the direction of the cruise is clockwise

        Wall-mounted: the direction of the cruise swings left and right

 

 

  • Cruise mode:

       Speed: Cruise provides speed 3S / speed 40S / speed 60S three options, corresponding to slow / medium / fast three speeds

       Stop: Pause the current state of the cruise, left click on the channel in the cruise or select the stop cruise button in the cruise mode to click

Panorama mode
Panorama mode
Installation mode
Installation mode
Cruise mode
Cruise mode

 

 

PTZ control

Cruise / PTZ / Zoom / Focus / Aperture / Preset:

The PTZ control function can be used only when the PTZ device (such as a ball machine) is connected to the main control device (such as NVR or DVR).

Cruise is to directly perform the screen cruise operation. The pan/tilt is to adjust the lens direction and zoom to replace the mirror multiple.

PTZ speed level control
PTZ speed level control
control
control
Zoom, focus
Zoom, focus
Preset
Preset

 

①:Adjust the PTZ control speed (default level is 6)

②:Adjust lens direction and cruise

③:Adjust the zoom and focus of the PTZ camera

④:Set and call the set bit, adjust the lens to the specified position, set the preset position, input the preset position later, click to call, the lens will automatically move to the specified position

 

Split screen number

  • The client provides 1 split screen / 4 split screen / 6 split screen / 8 split screen / 9 split screen / 16 split screen / 25 split screen / 36 split screen / 49 split screen, nine split screens can be switched at will

 

When the number of connected device channels is greater than the current number of split screens, the displayed split screen will automatically increase, reaching 49 split screens.

Split screen number
Split screen number

 

Other functions

  • Sharpness switching: SD SD and HD HD toggle buttons

 

  • sound:①Selected screen channel ②Click to turn off/on sound

 

  • Intercom:①Click the intercom button to open the intercom②Left-click and hold the connection to talk, click the exit button to exit the intercom 

 

  • Help: The help buttons under each interface are the corresponding function instructions.

 

  • Recording: When the live preview channel is recording, the icon is flashing.

 

  • shut down:①Click to exit the login button ②Click OK to log out and return to the login screen.
Other functions
Other functions
Intercom
Intercom

Related articles
(Applicable to  ip pro, eseecloud and vr cam app)

Frequently Asked Questions

Question one:After installation, open the CMS and display “Cannot load plugin”? Answer one: 1.Please confirm whether the installation path uses Chinese when installing, and the

Read More »

More features

User Management New user:①Click New User ②Enter username (required) + note name (optional)③Click to confirm   Modify permissions: Default: The default permissions include screenshot, video,

Read More »

User parameter

Basic Settings Split screen number:The selected split screen number is displayed after the re-login, and the CMS provides split screen 1/4/6/8/9/16/25/36/49 nine forms of choice.

Read More »

Equipment management

Add device Add a LAN device:①Enter the device management interface ②Refresh LAN device ③Check the device and click Add (LAN device can be filtered by

Read More »

Video playback

Video playback Playback four steps:①Select device channel ②Select video type ③Select playback date ④Confirm search video Retrieving the video requires three conditions of ‘device channel

Read More »

Live Preview

Connection/Disconnection The list style is treeshape: connection: ①Double-click on the selected device/channel to enter the connected video state. ②After selecting the device/channel, right click and

Read More »

User login

Local login ①Enter account + password  ②Click to login Local login can be logged in using the default account admin (the initial password is blank) Local

Read More »

Installation login

Installation and operation Step 1: Run the EseeCloud_Setup_3.0.1.exe installation package Step 2: Select the display language when installing Step 3: Read and determine whether to

Read More »

Introduction to EseeCloud CMS

Function introduction CMS is called Camera Monitor System. It is a camera monitoring client for online preview image, video storage, remote playback, device management, video/screen

Read More »

Foreword

Foreword Welcome to use our products! We are very honored to get your trust. In order to have a general understanding of our product CMS

Read More »

IP pro(VR Cam,EseeCloud)