Video playback

Video playback

Playback four steps：①Select device channel ②Select video type ③Select playback date ④Confirm search video

• Retrieving the video requires three conditions of ‘device channel + recording type + playback date’.
• Video types include: motion detection, timing detection, alarm detection, and manual detection. Generally, all types of videos can be retrieved by default.
• The selection of the device channel can directly affect the retrieval result. Be sure to confirm the online status of the device before recording.

Timed playback

• Timed playback：Select the timed playback operation, enter the recording effective time point in the time frame, and confirm that it can be played immediately (effective time point refers to: the time retrieved by video playback)
• Time drag playback：Adjust the time scale and drag the cursor on the timeline to the corresponding time (as shown in Figure 2 below)

Video sync

Steps：①Retrieve video  ②Check sync  ③Switching time point

• Date: Check the synchronization switching time point, the channel synchronization will not take effect.
• Time: Check the synchronous switching time point. The recording time of each channel will not take effect at the same time.

Video download

Batch download：Enter the time period to be downloaded at the start time + end time according to the needs of the retrieved recording time range.

Time period download：The time period of the video recording will also be displayed in the download resource. Click the download button for any time period according to your needs.

Other functions

Playback control：Support playback/pause/stop control in video playback, select the screen form in playback and click operation

Time scale adjustment：The settings in the Setup Wizard are not set. The playback timeline scale will default to 60 minutes. You can also modify the scale value by clicking ‘Reduction’ or ‘Magnify’ during video playback.